GPS & GSM
Personal Security
Voice, SMS & Location
Protection for lone workers in environments where injury or illness could be life threatening has until now been very difficult to implement. Historically, integrated GPS/GSM devices have been bulky and expensive.
GEOAssist is small, light weight and cost effective. It utilises GSM mobile phone technology to communicate voice alerts and GPS coordinates in seconds to co-workers, security personnel, family, etc..
When activated, GEOAssist will send its current position to the PPS. Using the optional PPS Place Point this information can be translated and displayed to a PPS or Mobile Phone user on their preferred mapping system.
|
Simply press the Alert button and your GPS |
|||
|
|
|||
|
|
|||
|
|
|
|
 |
|
|
|
|
 |
|
Receive SMS text Alerts - listen to live or recorded alerts |
Map GPS location using PlacePoint on PC screens |
Display GPS device location on Java enabled phone |
Receive Alerts directly to a PC. |
Hand held GSM and GPS personal alerter, only 85mm x 59mm x 25mm and only 90g. Fits perfectly in the palm of your hand.
Sends the users GPS location and opens a voice call to the PPS which is recorded and relayed to PC users and/or Mobile Phones.
An open voice call from GEOAssist can inform response personnel of the type of incident they are responding to, accident, attack, verbal, etc..
One button activation will generate multiple escalation actions (i.e. voice call, SMS alert and GPS coordinates).
Integrated LED’s display current GEOAssist status, GSM signal status and GPS satellite fix status.
Generate different level alerts by using any of the three buttons on the side of the device, (i.e. B1=Red, B2=Amber, B3=Call Office).
Configurable acknowledge timer. In this mode, if a user does not acknowledge a pre-alert warning GEOAssist will automatically generate a Red alert, sending GPS coordinates and opening a voice call to the PPS.
Configure GEOAssist using Bluetooth(r) and/or SMS.
Tri Band GSM - 900/1800/1900 Mhz or 850/1800/1900 MHz
